|
|
|
U851cW
Unidirectional Wireless Microphone
|
|
|
|
For more information about the availability of the U851cW Microphone or other audio-technica products, please contact
21st Century Video Limited by; Phone: +44 (0) 8450 940 570, FAX: +44 (0) 8450 940 599 or email:
sales@c21video.com
|
| Features: |
- Designed for surface-mount applications requiring high-quality sound pickup
- Heavy die-cast case and foam base pad minimise coupling of surface
vibration to the microphone
- Operates on phantom power
- Low-profile design for minimum visibility
- PivotPoint rotating output connector allows the cable to exit from either the rear
or the bottom of the microphone
- UniGuard RFI-shielding technology reduces RF interference
- UniSteep filter improves sound pickup
- 29.5" (0.75 m) cable with 4-pin HRS connector
- Connects to an ATW-T701 or ATW-T210 UniPak Transmitter in a ATW-701 or ATW-2110
Wireless Kit
|
| U851cW Technical Specifications: |
|
| Element: |
Condenser |
| Polar Pattern: |
Unidirectional, Half- cardioid |
| Frequency Response: |
30 - 20,000 Hz |
| Open Circuit Sensitivity: |
-40 dB (10.0mV) |
| Impedance: |
200 ohms |
| Maximum Input Sound Level: |
135 dB SPL, 1 kHz at 1% T.H.D. |
| Signal to Noise Ratio: |
72 dB, 1 kHz at 1Pa |
| Dynamic Range (Typical): |
108 dB, 1 kHz at Max SPL |
| Phantom Power Requirements: |
9 - 52V, 2mA typical |
| Switch: |
Off/On-Flat/On-Roll-off |
| Low Frequency Roll-off: |
80 Hz, 18 dB/octave |
| Weight: |
8.6oz (244 g) |
| Output Connector: |
4-pin HRS-type (power module) |
|
|
|
|
|
Updated: 06 January 2010.